Murals & Panoramics

How to measure for a mural

A mural is printed for one wall and one wall only, so the measurements have to be right the first time. Walls are rarely square and floors are rarely level, which is why every step below asks you to measure more than once. Take fifteen minutes with a tape and a pencil, then send us the numbers and we will confirm the size to order.

Steel tape measurePencil and paperA second pair of handsYour phone camera
Step 01

Measure the width in three places

Run the tape across the wall just under the ceiling, again at mid height, and again at the floor. Write down all three. Walls bow, and the number you need is the largest of the three.

Measure the wall itself, not the furniture in front of it. Move what you can.
A B C Order for the widest of A, B, C
Three readings. Order for the widest.
Step 02

Measure the height in three places

Measure floor to ceiling at the left edge, the centre and the right edge. Old floors settle and ceilings drop, so a difference of two inches across one wall is common. Use the tallest reading.

Measuring to the top of the baseboard instead of the floor is the most common mistake we see.
A B C Floors settle. Take the tallest.
Left, centre, right. Order for the tallest.
Step 03

Add the trim margin

A mural is never ordered at the exact size of the wall. Extra material on all four sides gives the installer room to align the panels and cut clean against the ceiling and baseboard. Allow at least 2 in / 5 cm on every side, and where a mural comes in fixed sizes, take the next size up.

Ordering the exact wall size is the one mistake that cannot be fixed on site.
Your wall Ordered size = wall + trim on all four sides
The printed mural runs past the wall on every side.
Step 04

Record doors, windows and outlets

Measure each opening and note how far it sits from the left edge of the wall and from the floor. You still order the full wall, but the position of a window changes where the focal point of the design lands.

door window outlet
Width, height and distance from the left edge.
Step 05

Check how the panels will run

Murals arrive as numbered panels that hang left to right in sequence, with the seams overlapping slightly. Knowing the panel count tells you how much room the installer needs in front of the wall to lay them out.

1 2 3 4 Panels hang in order, seams overlap slightly
Numbered panels, hung in order.
Step 06

Photograph the wall and send it over

Stand square to the wall and take one photo that captures it floor to ceiling, corner to corner. Send it with your measurements and we will confirm the size and the number of panels before the mural goes to print.

Straight on, whole wall, floor to ceiling Send it with your measurements
One straight-on photo tells us more than a paragraph.

Every mural line sizes differently. Some are printed to your exact wall, others arrive in fixed sizes that have to be trimmed on site. Send us your measurements and a photo of the wall and we will confirm the right size and quantity before anything is printed. Sloped ceilings, curved walls and stairwells are best measured together.

Request an appointment